Scantool TSX 1060, Руководство пользователя

Страница: 4 / 11

4
1 PRODUCT DESCRIPTION
1.1 Technical Characteristics
Cutting Capability : 1,5mm
Cutting Length : 1020mm
Platform Width : 600mm
Back Gauge Distance : 625mm
Machinery Width : 1030/1420mm
Machinery Length : 2475/1650mm
Machinery Height : 1080/1360mm
Machinery Weight : 363Kg
2 CARRIAGE AND LAYOUT CONDITIONS
Lift the machine with a crane by using a chain or steel rope. The equipment for the lifting
must be adequate for the machinery weight. Before carriage fix the moveable parts. Fix
the cutting arm and press. The
carriage must be done by professional persons. Don’t stay
under the machine during the carriage.
It’s adequate to carry the machine in water resistant foil to protect it from the weather
conditions. Make sure that the machinery is perfectly located after loading on the truck. If
necessary, support the parts which aren’t perfectly located. Fix the machine on the truck
so it can’t be move.
ATTENTION!!!
By taking delivery control if there is any damage on the machine. If there is any damage,
note it on the delivery slip of the transporter and inform the carting agent.
WARNING
The user has to read the operating manual carefully. The user has to act according to the
instructions. Otherwise the manufacturer isn’t responsible for any accidents or damages.
2.2 Layout Conditions
For an accurate, efficient and long working of the machine, it has to be placed on an even
base. The accuracy has to be provided with the water gauge. This accuracy has to be
controlled in specific intervals. The first control has to be done after 24 hours. After the
first control, the control has to be done monthly and yearly.
For doesn’t falling over, the machine has to be installed on the ground. The falling over of
the machine can be responsible for serious damages.