Scantool SC 250 T, Руководство пользователя

Страница: 8 / 16

6
Fig.: 3.2
Before starting the trimming operation it is important that the machine runs at max speed and that the
trimming is made at max possible speed. Secure the work piece in clamps or equal, as it is safer than
holding the work piece in your hands. Also it frees both hands to do the operations.
If the motor is slowed down during trimming this can result in burn-out of the motor. The best possible
result can be obtained by leading the work piece slowly towards the steel brush and avoid excessive
pressure against the brush.
Do not the rotation of the steel brush by pressing a work piece against it. Always let the steel brush stop
by itself.