9
2.4 Maintenance
It is recommended occasionally to check if the spark arrester and the suction channels
need cleaning. The dust bag has to be emptied after use and drawer (P) if necessary. The
contact wheel must be replaced if it is loose. Replace the grinding belt when needed.
Replacing the grinding belt (fig. 2.2)
Fig.: 2.2
Replace the grinding belt by pulling the handle (S) forward. Loosen the safety screw on the
cover lid (A) before opening the cover lid and remove the worn out belt (T) by pressing the
belt together between the larger and smaller contact roller and at the same time pull it
away from the machine. Put on a new belt. Check that the arrows on the reverse side of
the belt are corresponding to the direction of the rotation (see arrow on top of lid). Re-
tighten the handle (R) and adjust the running alignment of the belt with the handle (B).
