Scantool PV 35, Руководство пользователя

Страница: 15 / 26

15
Warning: It is suggested to protect the main electric line from possible overloads by means of
safety switches.
4. Foot Pedal
The foot pedal is equipped with an “emergency
button” which instantly stops all the machine activity
by disabling the electric supply until released.
5. Starting the Machine
Following steps will help you start the machine and get ready for the first bending operation. See the
sections identifying the necessary switches and buttons.
•
Make sure the electrical connection is correct
•
Turn on the “main switch”
•
You will see electric on “indicator”
•
Pus
h “start button”
•
Choose a speed from the “speed selector”
•
Use the “foot pedals” to rotate the rolls
•
Make bending
•
Use the “emergency button” on “foot pedal” to stop the machine
•
Turn off the “main switch”
6. Basic Operation Terms
The PV 35 has two rolls powered and top roll idle. The lower rolls are direct driven by a reducer motor.
Top roll can be adjusted by a screw driven system to make the bending in a wide radius range.
Therefore, bending operation is simple and smooth however requires experience for efficient working.
Following recommendations will be helpful during operation:
•
It is recommended that the user have basic bending information with this kind of machines.
•
Making a tight bend in one pass is not possible. So you need several passes before you can
achieve a certain radius. Tighter curves and full radii always take a lot of time.
•
During operation never wear garments with loose parts, which may be dragged by the machine
parts, long loose hair, necklaces, rings etc.
•
Use emergency button in case of any emergency.
Figure 2
Emergency
stop
Foot
pedals