Scantool MB-45, Инструкции по безопасности и руководство оператора, Страница: 3 / 27

MODEL MB-45
MODEL MB-45
Operator’s manual for Drilling Machine
- 3 -
I. SAFETY INSTRUCTION
Drilling machine on electromagnetic base should be used only for the purpose of
appropriation. Using machine incompatibly purpose might be threaten another people.
1. GENERAL INFORMATION
Portable drilling machines with electromagnetic bases are fast becoming very universal
power tools. Not only at steel fabricating workshops or steel building sites, but also at every
factory maintenance workshop, truck manufacturer & repair company, military equipment
service, onboard ship maintenance shop etc.
But full advantages of electromagnetic drilling machines can be achieved only with optimal
tooling. Milling cutters are designed and manufactured specifically for use with these
machines and offer a whole range of advantages in one pass and with precision not
otherwise attainable without heavy stationary equipment. The drill is equipped with
a powerful verified for many years of exploitation drive.
2. GENERAL SAFETY ADVICE
Drilling machine must not be used when:
1.
The operator has not read the o
perator’s Manual.
2. The work to be done is not in agreement with the recommendations in this Manual.
3. Drilling machine is not complete or has been repaired with non-original parts.
4. Power supply parameters do not conform to those
stated on the motor’s plate.
5. Machines operator has not checked condition of the drilling machine, condition of
power cable, control panel or cutter.
6. Power supply socket is not equipped with a protection circuit.
7. Machine is not secured with safety strap as a protection from falling down
especially when used at heights or in vertical or upside-down positions.
8. Bystanders are present in the immediate vicinity of machine.
Important rules of safe use of drilling machine
1) Before attempting to work with the machine check condition of electrics including power
cord and plug.
2) The drilling machine should be connected to an installation equipped with protection
circuit (neutral or ground) and protected with a 16A fuse for 220V and 32A fuse for
120V. When used on building sites, it must be supplied through a separation
transformer made in the second class of protection
3) Machine can be used outdoors, but is not weatherproof. Do not expose to rain, snow or
frost.
4) Machine should not be used on: rusty surfaces, steel plates with thick covered with
paint, uneven surfaces, next to a welding machine.