Scantool 420GSHT, Инструкция по эксплуатации

Страница: 7 / 29

6
5. TRANSPORTATATION & INSTALLATION:
5-1. Unpacking
1.
Transportation to desired location before unpacking, please use-lifting jack. (Fig. B)
2. Transportation after unpacking, please use heavy duty fiber belt to lift up the machine.
Fig. B
ALLWAYS KEEP PROPER FOOTING & BALANCE WHILE MOVING THIS MACHINE.
5-2. TRANSPORTATION OF MACHINE:
As this machine weights 490 kg (1078 lbs) it is recommended that the machine be transported with help
of lifting jack.
Transportation Recommendation:
1.
Tighten all locks before operation.
2. Always keep proper footing & balance while moving this
machine, and only use a heavy duty of fiber belt to lift the
machine as per Fig. A.
3. TURN OFF the power before wiring & be sure machine is pr
operly grounded. Overload & circuit breaker are recommended
for safety wiring.
4. Tighten 4 bolts to base holes after machine is balanced.
5. Check carefully if the saw blade is running in counter-
clockwise direction if not, reverse the wiring per circuit diagram,
then repeat the running test.
6. Keep machine always out from sun, dust, wet, or raining area.
5-3. CLEAIG & LURICATING
(1) Your machine has been coated with a heavy grease to protect it in shipping. This coating should
be completely removed before operating the machine. Commercial degreaser, kerosene or
similar solvent may be used to remove the grease from the machine, but avoid getting solvent
on belts or other rubber parts.
(2) After cleaning, coat all bright work with a light lubricant. Lubricate all points in Fig 1. with a
medium consistency machine oil.
Fig. A