Scantech DC-100 Скачать руководство пользователя страница 34

Страница: 34 / 86

Code ID

Read “Enable CodeID

”

to start the setting, then scan the corresponding 16 HEX

Value of CodeID character and save.

UCC/EAN-128- Enable CODEID

Set the CodeID of UCC/EAN-128 as

“

”（

16 HEX Value is 0x70

）：

1. Read above “Enable CodeID”

2. Read number

“

”

，

“

”

(See Appendix- Data Code)

3. Read “Save”

Code Length Limit

The scanner can only read the the code length within the limited of code

UCC/EAN-128, the limit is from the minimum to maximum value (including the

minimum and maximum value), the unit is character. If the length of code

UCC/EAN-128 is out of the limit, the scanner will not be able to read or transmit the

code.

Read “Minimum Length ” to set the minimum length of code.

Read “Maximum Length” to set maximum length of code.

UCC/EAN-128 Maximum Length UCC/EAN-128 Minimum Length

The maximum length value of any type of 1D code is not more than 255. If the

maximum length is shorter than the minimum length, the scanner can only read this

two length of code; if the maximum length is equal to minimum length, the scanner can

only read the code of this length.

This length is the length of the code itself, not including prefix/suffix, tailed suffix,

AIM-ID,CODEID.

Содержание DC-100























































































Результаты поиска

Содержание DC-100

Отзывы:

Похожие инструкции для DC-100

Бренды по названию

Популярные бренды

Scantech DC-100, Руководство по программированию

Результаты поиска

Содержание DC-100

Отзывы:

Похожие инструкции для DC-100

Бренды по названию

Популярные бренды