Scanreco G5 LP, Инструкция по эксплуатации

Страница: 5 / 10

5.4 Changing battery
The G5 Pocket transmitter is equipped with 3 standard AAA cell batteries; to change
batteries follow the instructions below
1. Remove the belt clip by unscrewing the top middle screw.
2. Unscrew the three screws holding the lid.
3. Remove the batteries.
4. Remove all dirt/dust to ensure no water can enter the unit.
5. Insert new batteries, mind the polarity!
6. Reassemble the lid and the belt clip.
Tighten the screws according to chapter 7.4.
Document type Document number Page Rev
Instruction Manual 66067 A 5 of 9