SCANMASKIN ScanDust 6000, Руководство по эксплуатации

Страница: 11 / 17

11
Problem solving
The ScanDust 6000 dust extractor is designed and manufactured for severe environments and tasks, but the
user should note that the machine components must be protected from knocks and blows. Filter, seals,
attachments, and connections are carefully adapted and selected with regard to the operator’s work
environment. Therefore, the machine must be treated with care if it is to work correctly for many years.
Problem Cause Procedure
Motor does not start No power Connect the machine
Switch defective Change
Motor stops immediately Wrong fuse Connect the right fuse
after starting
Motor runs, but there is Hose not connected Connect the hose
no suction Hose blocked Clean the hose
No plastic bag Fit plastic bag
Motor runs but suction Damage to the hose Change hose
is poor Filter blocked Change filter
Top cover loose Adjust
Dirt in the flap Clean the flap.
Use protective equipment
Sealing defective Change current seal
Dust blows from motor Filter defective or loose Adjust or change
Abnormal noise Order service
KEEP THESE INSTRUCTIONS!