SCANMASKIN Scan Combiflex Handyman, Инструкция по эксплуатации и перечень запасных частей, Страница: 13 / 23

Operation manual / Spare parts list
Scan Combiflex Handyman 125
13
During operation never increase the speed of the
machine to above that of the maximum admissible
speed of the grinding tool!
Switch-on
1. Plug in mains connector.
2. Hold the machine firmly with both hands.
3. To turn the machine on, push the ON/OFF
switch toward the front until it clicks in.
Fix the switch
4. Push the blocking to the front.
The switch is fixed.
Switch-off
1. Press the ON/OFF switch to trigger the
blocking and the machine shuts down.
Attention, danger of overload by improper use!
The machine may be used only flat. The diamond disc must lie flat on the ground.
No excessive pressure may be exerted on the machine.
Do not lie with full body weight on the machine.
For protection against overheating, when a critical temperature is reached the electronic safety
feature switches into the cool down mode. After a cool-down time of approx. 10 - 20 sec. the
machine is again ready for operation. Turn the machine off and back on again to activate the
electronic constant speed control.
4.3
Vacuum system
The SC Handyman125 is equipped in series with an Vacuum system.
Connecting piece Ø 34mm suitable for customary vacuum cleaner tube Ø 33mm.
Push the tube by light tricks on the connecting piece.
The brush around the diamond disc guarantees that the grinding dust remains to a great extent
within the vacuum housing and can be sucked off immediately. During plain work the grinding dust
is sucked off to almost 100%.
Caution, Material damages are possible!
To prevent material damage by the dust, always work with vacuum system and suitable
industrial vacuum cleaner.