Scan Combiflex 800 – Manual
Chapter 2
- 15 -
4 Operation
4.1 Precautions
Any machine, if it is not used according the regulations, may be hazardous for operating,
setting-up and service personnel. The operating authority is responsible for compliance with
the safety regulations during operation and maintenance, and for the use of safety devices
supplied with the machine, as well as the provision of appropriate additional safety devices!
Never operate the machine without proper tools.
Eye and ear protection must be worn at all times.
Never operate the machine when its not in its upright position.
Make sure there is no debris in the work area.
Check the work area for screws or other hard objects in the concrete. Don’t use the machine
if there are any foreign objects stuck into the surface. Such objects must be removed prior to
operation of machine.
Read “2
Safety Regulations
” before operating the machine.
4.2 Operation of machine
The gear barrel has got three grinding heads that rotates in the opposite direction of the gear barrel.
Each grinding head is equipped with a Scan-on plate where each plate hold the tools used. See
“
Figure 4-1
”.
Figure 4-1
Illustrates the rotation of the grinding heads versus the gear barrel.
