SCANMASKIN SC-330 3, Руководство пользователя

Страница: 50 / 62

Scan Combiflex 330 – Manual
- - 48
4.6 Safety off position
When working on the machine, either maintenance or tool change, the machine must be set to the
“Safety off position”. See “
2.7 Definition of the “Safety off position”
” for further information.
4.7 Grinding
Refer to the “Grinding Guide” for instructions and information about grinding.
4.8 Changing tools
Before changing tools, read “2.8 Safety regarding maintenance”.
This illustration shows how to change the tools.
Figure 4-2 How to fit the diamond tools on the Scan-On plate
§
Insert the segment at the widest part of the slot
§
Push the segment outwards
§
The segment is now fit on the Scan-On plate
To make sure that the tool is secured, use a small plastic hammer and slightly hit the segment
outwards. In reverse this technique can be used to loosen tools that are stuck.
50
www.scanmaskin.com