manualshive.com logo in svg

SCANMASKIN Ferox 300, Руководство пользователя

Поделиться
Скачать
SCANMASKIN Ferox 300 Скачать руководство пользователя страница 30

30

www.scanmaskin.com

3  TECHNICAL DATA 

Working width (mm)

300 (14 in)

Turbine power (kW)

11 (12.7 kW, 17 hp)

Weight (kg)

400 (882 Lbs)

Power requirements

400 V, 50 Hz, 3 ph., 20 A, (460 V, 60 Hz, 3 ph., 20 

A)

Dimensions (LxHxB) (cm)

175 x 100 x 47

Dimensions (HxLxW) (in)

39 x 69 x 19

Average value of acceleration ahv *

2.9 m/s2

Noise level Lwa *

99 dB(A)

Noise level Leq *

87 dB(A)

4  SAFETY RULES FOR OPERATING FEROX300

The Ferox 300 shot blasting machine is constructed according to existing safety rules and regula-

tions. These technical precautions should not be removed or changed under any circumstances. 

While operating the machine the following items should also be kept in mind:

Disconnect the machine before commencing any servicing or maintenance work – however meni-

al. Never unplug the machine while it is still running.

This notice can be found in every manual but in nearly every part of the Ferox 300 high electrical 

currents are transmitted. The danger of injury is therefore not only from electric shock, but also 

from moving parts of the machine.

It is necessary to use safety goggles with side protectors and ear plugs. All persons, in the opera-

ting area of the shotblaster must take these precautions. When switching on, or lifting the machine 

during blasting, it is possible that shot escapes at high speed. Unprotected eyes can be seriously 

damaged in this case.

Never wear loose or badly fi tting clothing. Flapping sleeves may be pulled into the machine cau-

sing serious injury.

All rotating parts of the machine are suitably protected by covers, which prevent clothes or similar 

from entering the machine. Under no circumstances should these covers be removed before you 

switch the machine on.

Access by unauthorized persons into the blasting area should be prevented. (Due to a high risk of 

slipping on lost shot)

The Ferox 300 should be switched off immediately if unusual noises or vibrations are detected 

during the operating of the machinery. A thorough check must be carried out in order to detect 

the cause.

Always pre check the fl oor for undulation, stones, screws or other foreign bodies. It might be 

Содержание Ferox 300



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды