4.0 LCM Main MENU Function Operations:
4.1 SWITCH SETTING
：
(Default: 1 2 3 4)
OUTPUT 1 2 3 4
INPUT 1 2 3 4
This function is used to switch the input/output port. Enter the SWITCH SETTING menu. Press the
ENTER key, then the LCM second line INPUT will flash. Press LEFT or RIGHT button to select the
output to be modified. Then press UP or Down button to select the input port. After that, press
ENTER to confirm setting.
OUTPUT 1 2 3 4
INPUT 1 2 3 4
4.2 MATRIX IR ID
：
(Default IR ID: 4)
This function must be set to match the Matrix remote control IR01 with the matrix itself. A
conflict with other devices remote control is avoided.
After entering MATRIX IR ID menu, press ENTER, the LCM LINE 1 number will flash. Then
Press UP or DOWN button to select the number, and then press ENTER to confirm.
When finish MATRIX IR ID setting, MATRIX remote control IR01 must also set the same ID
in order to operation in normal.
Remote IR ID setting mode: Press and hold the POWER button, then press the
number button which can be set from 0 to 9, total 10 groups. (See 5.1)
These settings on IR01 remote control have to be done the first time you use the IR01 or
when you change the batteries.
MATRIX IR ID 4
HS04M
MATRIX IR ID 4
＋
MATRIX IR ID 4
