6
User Manual
HKM01-4K
RS232 Setting
Refer to the instructions below to adjust the DIP switch.
1.
Check the bottom of the receiver (HKM01R-4K).
2.
Press Button 1 to select a Baud Rate.
a.
115200 (Default), 57600, 38400, 19200, 14400, 9600, 4800, 2400, 1200bps.
3.
Press Button 2 to choose parameter.
4.
Press Button 1 again to confirm the change.
EDID Setting
1.
Remove all the HDMI cables.
2.
Set up the DIP switch of Tx (HKM01T-4K).
3.
Push the button at the bottom of the transmitter (HKM01T-4K).
Tx (HKM01T-4K)
SWITCH
Function
Settings
SW2
RS232 On
(Default)
OFF
↑
SW3
OFF
↑
Rx (HKM01R-4K)
SWITCH
Function
Settings
SW2
RS232 On
(Default)
OFF
↑
SWITCH EDID Mode / Settings
SW4
1080p 2CH
(Default)
ON
↓
Copy
the resolution
from Rx side
OFF
↑
Copy
the resolution
from loop out side
ON
↓
SW5
ON
↓
ON
↓
OFF
↑
Button