1
User Manual
HE01S
Introduction
HE01S is an HDMI extender that can use Ethernet cable to send an HDMI signal for up to 50 meters. Its RX
unit requires no power when the transmission distance under 30M. its transmitter unit has EDID auto
backup function that can save desired resolution and restore it whenever.
Features
Resolution up to 1080p@60Hz.
Signal extension up to 50M over CAT5e cable.
No external power required at RX unit under a distance of 30M.
"
Panel view & Function
HE01ST
EDID Setup
Use default EDID
move DIP switch 1 off
↑
move DIP switch 2 off
↑
Select the first default EDID: support 1080i / LPCM 2 Channel.
move DIP switch 2 on
↓
Select the second default EDID: support 1080p / LPCM 5.1 Channel.
Use external EDID:
1.
move DIP switch 1 on
↓
, HE01ST unplug the power.
2.
HE01ST connect to HDMI connector of TV for auto backup.
3.
Plug the power for HE01ST, TV EDID back up completed (Blue Power LED keep flash)
4.
After complete TV EDID backup, HE01ST power must be reset (unplug and plug) to activate the n
ew
EDID.
Transmitter Unit LED Indication
BLUE ON
Power on
Flash
TV EDID backup completed
RJ45 Connector LED
