3
User Manual
CD408HD
Jumper Setting For UTC Mode Output
To open the metal chassis, u
sing jumper setting could setup the upper BNC output for Video
Distribution or UTC output Mode.
P1 = OUPUT1 setting as Video Distribution mode
P2 = OUPUT2 setting as Video Distribution mode
P3 = OUPUT3 setting as Video Distribution mode
P4 = OUPUT4 setting as Video Distribution mode
SETUP Upper BNC output as Video Distribution mode, support Video output only.
SETUP Upper BNC output as UTC mode, support Video & UTC control data output.
UTC Instruction
1.
Jumper default as video distribution output mode.
2.
Upper BNC output under UTC mode, the upper BNC output must connect with HD-DVR, not allow
connecting with CVBS Camera/DVR to avoid picture over brightness.
3.
Under video distribution mode, no video on UTC output port.