Scandomestic EMB34G4Q, Руководство пользователя

Страница: 33 / 99

Installation
side must be open.
Remove all packing material and accessories.
Examine the oven for any damage such as
dents or broken door. Do not install if oven is
damaged.
Countertop Installation
Cabinet: Remove any protective film found
on the microwave oven cabinet surface.
1.
Select a level surface that provide
enough open space for the intake
and/or outlet vents .
A 10-cm spacing should be kept between
the appliance and right and back walls,
and a 30-cm spacing kept on the top.Never dismantle
the applicance's feet ,nor block the air intake and
exhaust opening.
can damage the oven.
) Place the oven as far away from
radios and TV as possible.
Operation of microwave oven may
cause interference to your radio or TV
reception.
outlet. Be sure the voltage and the
frequency is the same as the voltage
and the frequency on the rating label.
1) Blocking the intake and/or outlet openings
2
3 Plug your oven into a standard household )
，
A
B
C
Fig 1
Fig 2
( ) Fig 1 ure
30cm
OPEN
eft The l
12 inch( )
4.0 inch(10cm)
4.0 inch(10cm)
2. The applicance can be installed
with a degree of overlap .
，
then replacing screw in its place tightly.
,Taking off installation board ) loosening screw
) taking off four screws as shown in the pictur
) putting
installation board
to the following location
then fixing screw just taking off tightly
C
( ) Figure2
(A
(B
(
e.
The maximum overlap height is layers. two
4
）
Warning: T he plug socket,electric
appliances or the appliance which are
liable effected by heat and moisture should
be kept away from any vents on the oven.
8