position shown (see
page 10).
•
COOLCUBE
is
overfilled.
•
Appliance exposed to
direct sunlight or a
heat source.
•
Door is opened too
often.
Unusual noises or
noisy operation
•
Appliance is not on a
level, firm surface or
may be touching other
items.
•
Note: It is normal to
hear
refrigerant
flowing
as
the
compressor
stops
and starts.
Outer surfaces are
wet
•
Water source or leak
too
near
the
appliance
-
dry
surfaces thoroughly
and
move
the
appliance.
Inner surfaces are
wet
•
Door
opened
too
often or kept open too
often.
•
Make sure that the
door seals properly.
REVERSING THE DOOR HINGE
Fig
1
Position
of
components prior to
reversal of the door
hinge.
Fig
2
Position
of
components
after
reversal of the door
hinge.
The door can be opened from left to right and vice versa.
Should you wish to change the opening direction, please
follow these instructions.
Note:
all parts removed should be kept safely. You will
require these for the reinstallation of the door.
•
Remove the two screws (1) that hold the upper
hinge (5) (right side) to the frame.
•
Lift the door off and place on a padded surface to
prevent scratching.
•
Remove the blanking plug (8) from the hole in the
upper left corner of the door and transfer it to the
uncovered hole on the upper right corner. Press
firmly to secure it.
•
Remove the two screws (6) that hold the lower
hinge (2).
•
Remove the adjustable front left foot and transfer
it to the other side.
