Page 18
5. Programming The Dishwasher
Before using your dishwasher:
1. Loading the basket (refer to page 24)
2. Fill the rinse aid dispenser (refer to page 26)
3. Fill in detergent (refer to page 27)
Starting a Cycle Wash
1. Draw out the lower and upper basket, load the dishes and push them back. It is commended to load
the lower basket first, then the upper one.
2. Pour in the detergent. (Refer to page 27)
3. Insert the plug into the socket. The power supply refer to last page ”Product fiche”. Make sure that
the water supply is turned on to full pressure.
4. Close the door, press the Power button, to switch on the machine.
5. Choose a program, the response light will turn on. Then press the Start/Pause button, the dishwasher
will start its cycle.
Changing the Program Mid-Cycle
A wash cycle can only be changed if it has been running for a short time otherwise, the detergent may have
already been released and the dishwasher may have already drained the wash water. If this is the case, the
dishwasher needs to be reset and the detergent dispenser must be refilled. To reset the dishwasher, follow the
instructions below:
1. Press the Start/Pause button to pause the washing.
2. Press program button for more than 3 seconds - the program will cancel.
3. Press the program button to select the desired program.
4. Press the Start/Pause button, after 10 seconds, the dishwasher will start.
Starting A Cycle Wash
1.
Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one.
2.
Pour in the detergent.
3.
Insert the plug into the socket. The power supply refer to last page ”Product fiche”.
Make sure that the water supply is turned on to full pressure.
4.
Close the door, press the Power button, to switch on the machine.
5.
Choose a program, the response light will turn on. Then press the Start/Pause
button, the dishwasher will start its cycle.
Changing The Program Mid-cycle
A wash cycle can only be changed if it has been running for a short time otherwise,
the detergent may have already been released and the dishwasher may have already
drained the wash water. If this is the case, the dishwasher needs to be reset and the
detergent dispenser must be refilled. To reset the dishwasher, follow the
instructions below:
1.
Press the Start/Pause button to pause the washing.
2.
Press program button for more than 3 seconds - the program will cancel.
3.
Press the program button to select the desired program.
4.
Press the Start/Pause button, after 10 seconds, the dishwasher will start.
3 sec
13
*AS/NZS 2007.1
test in accordance with
:
*AS/NZS 2007.1.
This program is the test cycle. The information for comparability
NOTE
:
Forget To Add A Dish?
A forgotten dish can be added any time before the detergent dispenser opens. If
this is the case, follow the instructions below:
1.
Press the Start/Pause button to pause the washing.
2.
Wait 5 seconds then open the door.
3.
Add the forgotten dishes.
4.
Close the door.
5.
Press the Start/Pause button after 10 seconds, the dishwasher will start.
After 5 sec
WARNING
It is dangerous to open the door
mid-cycle, as hot steam may
scald you.
14
USING YOUR DISHWASHER
1.
Loading the basket
2.
Fill the rinse aid dispenser (Please check the section 1 of PART
Ⅱ
:
Special Version)
3.
Fill in detergent (Please check the section 1 of PART
Ⅱ
:
Special Version)
9
Adjusting the upper basket
The height of the upper basket can be easily adjusted to accommodate taller dishes
in either the upper or lower basket.
To adjust the height of the upper rack, follow these steps:
4
1
Pull out upper basket.
2
Remove upper basket.
3
Re-attach upper basket to the upper
or lower rollers.
Push in upper basket.
lower position
upper position
Type 1:
Basket Used Tips
Before using your dishwasher :
Inside Outside
