Scandinavian Appliances Norcool Cave 100, Руководство пользователя

Страница: 28 / 36

Cave 40/100/100S
Cave 40
Exterior dimensions w595 x h845-895mm x d546mm/
581mm with handle
(carcass height 700 mm)
Capacity Ca 40 bottles
Defrosting Automatic
Weight 43 kg
Energy consumption 0,353 kWh
Thermostat setting 8-15 °C
Ambient temperature 10-27 °C
Insulation Polyurethane foam, CFC-free
Compressor Danfoss
Cooling agent R134A
Volt/Hz 220-240V AC 50Hz
Cable connection length 2,6 m
Door hanging Right
Cave 100
Exterior dimensions w595 x h1730 x d650mm/
687 with handle
Capacity Ca 100 bottles
Defrosting Automatic
Weight 83 kg
Energy consumption 0,76 kWh
Thermostat setting 8-15 °C
Ambient temperature 10-27 °C
Insulation Polyurethane foam, CFC-free
Compressor Danfoss
Cooling agent R134A
Volt/Hz 220-240V AC 50Hz
Cable connection length 2,4 m
Door hanging Right
Cave 100 S
Exterior dimensions w595 x h1730 x d650mm/
672 with handle
Capacity Ca 100 bottles
Defrosting Automatic
Weight 85 kg
Energy consumption 0,76 kWh
Thermostat setting 8-15 °C
Ambient temperature 10-27 °C
Insulation Polyurethane foam, CFC-free
Compressor Danfoss
Cooling agent R134A
Volt/Hz 220-240V AC 50Hz
Cable connection length 2,4 m
Door hanging Right
Integration
Cave 40
When integrated into a fitted kitchen, air intake is ensured by using the grille supplied fitted into
the plinth under the cabinet. The grille area is 126 cm
2
. If you wish to use a different grille to that
supplied with the cabinet, ensure it has at least the same size. Exhaust air passes through the
grille mounted on the top of the cabinet, and which must not be covered.
NOTE: Failure to ensure sufficient air circulation is not good for the cabinet and reduces its
service life.
Cabinet width is 595 mm, and it requires a space of 600 mm wide to provide a gap of 5 mm either
side, to prevent restricting door opening and closing.
Cabinet height can be adjusted by the adjustable legs, to ensure the top of the cabinet is flush with
the underside of the worktop. NB: ensure the cabinet is level.
When the cabinet has been correctly positioned, check that the electric cable does not pass any
sharp edges and is not jammed under the cabinet. Leave the plug underneath the cabinet and do
not insert it in the mains socket until you have completed the installation.
Cut an opening for the air intake grille in the plinth (225mm x 94mm). Fit the grille into the opening.
(see figure 1 on next page)
4