Adjustment of the handle
The vertical position of the handle can be
adjusted with the screw in the door frame.
Accessories
For these models you can have the following accessories:
Handle
The door is opened by turning the handle
counter-clockwise.
Adjustment screws
The stove has two adjustment screws
on the bottom that can be used for
levelling the stove.
Self-closing door (BA 1)
The door is prepared with a self-closing function at the
factory. If you tighten the spring with the hexagon spanner,
the door will close automatically when you let go of it.
•
Lateral covering in soapsto-
ne or ceramic tiles (white or
blue) for SCAN Basic 3
•
Top plate in soapstone for
SCAN Basic 3
• Baking-compartment
door
• Small
grill
•
Steel floor plate
• Connection
piece
for fresh-air intake
SCAN Basic 1 & SCAN Basic 3
Data for calculation of the chimney
Stove
model
SCAN
Connecting
adaptor
mm
1
Density of
flue gas
flow
g/s
2
Flue gas
tempera-
ture
oC
3
Minimum
draft
Pa
4
Density of
flue gas
flow
g/s
5
Flue gas
temperature
oC
6
Minimum
draft
Pa
7
0,8
Minimum
draft
Pa
B1&3
150
23
240
10
6
300
14
11
With closed doors
With open doors
Column 2 and 5 show the flue gas temperature in the connecting adaptor
Column 3 and 6 show the lowest/minimum draft in Pa by rated value
Column 7 shows the lowest/minimum draft in Pa by 0.8 x rated value
The stoves can be prepared for an external air supply where
fresh air is let directly into the combustion chamber (must be
mounted from the factory).
