Content
The Product
Product registration number
Installation
Installation
Approval
Positioning the stove
Position in relation to non-flammable walls
Distance to flammable walls
Distance to furniture
Technical data and dimensions
Assembly
Unpacking
Service
package
Load bearing underlay
Floor
plate
Adjusting
screw
Type
plate
Product registration number
Accessories
Side
panels
Flue collar connection piece rear outlet
Flue collar top outlet
Connection between stove and steel chimney
Connection with 90° elbow pipe
Requirements for chimney
Fresh air supply
Connection piece with damper for fresh air
Instructions for use
CB
Technology
Primary
air
Secondary
air
Smoke deflector plates
Instructions for heating
Lighting
Handling
fuels
Maintenance
Troubleshooting
Version GB 27.11.07 - 1
Scan Basic 4-2 & 4-2 K
Congratulations on your new Scan wood-burning stove
You have purchased a product by one of Europe’s leading manufacturer’s of wood-burning stoves, and we are sure that you will have years
of pleasure with your purchase. To make the best possible use of your stove, it is important that you follow the advice and instructions in this
manual.
Please read this Assembly- and instructions manual before you start to assemble your stove.
Make a note of your stove’s product
registration number here so that you
have it available if you need to contact
us.
Test in compliance with
EN 13240
The EC declaration of conformity is available from www.scan.dk
A S S E M B LY- A N D I N S T R U C T I O N S F O R U S E
