Scan-Electronics RadiaCode-101, Руководство пользователя

Страница: 24 / 36

22
© 2021 Scan Electronics Ltd.
Standalone usage
3.8.3 Dose rate
Use [Dose rate] item of Settings to set up the alarm thresholds 1 and 2 for the dose rate estimation:
·
while in the Settings ,set focus on the [Dose rate] item by short pressing
the " up " and " down " swing buttons;
·
enter the submenu by short pressing the round button
If you need to change the alarm threshold 1, take the following steps (while in the [Dose rate] submenu):
·
set focus on [Alarm 1] item by short pressing
the swing buttons;
·
enter the submenu by short pressing the round
button, then setup dialog will appear;
·
select the desired digit of the threshold value
by
short pressing the round button;
·
change the value of the selected digit by short
pressing the swing buttons;
·
repeat the previous two steps to set all digits of
the value.
·
To return to the higher level with or without
changes select
[Enter] or [Esc] item
respectively;
·
confirm your choice by long pressing the round
button.
If you need to change the alarm threshold 2, take the following steps (while in the [Dose rate] submenu):
·
set focus on [Alarm 2] item by short pressing
the swing buttons;
·
enter the submenu by short pressing the round
button, then setup dialog will appear;
·
select the desired digit of the threshold value
by
short pressing the round button;
·
change the value of the selected digit by short
pressing the swing buttons;
·
repeat the previous two steps to set all digits of
the value.
·
To return to the higher level with or without
changes select
[Enter] or [Esc] item
respectively;
·
confirm your choice by long pressing the round
button.