SCAN domestic SFO 2201, Руководство пользователя

Страница: 27 / 31

27
Cleaning
The control panel can be cleaned by using a lightly dampened
cloth. After cleaning,make sure to dry it thoroughly. For the exte-
rior use a good appliance polish wax.
Never use sharp objects, scouring pads or harsh cleaners on any
part of the dishwasher.
Cleaning The Door
To clean the edge around the door, you should use only a soft
warm, damp cloth. To avoid penetration of water into the door
lock and electrical components, do not use a spray cleaner of
any kind.
• Never use a spray cleaner to clean the door panel as it may
damage the door lock and electrical components.
Warning: Abrasive agents or some paper towel should not be
used because of the risk of scratching or leaving spots on the
stainless steel surface.
Cleaning the Spray Arms
The spray arms can be easily removed for periodic cleaning of the
nozzles to prevent possible clogging. Wash them under running
water and carefully replace them in their seats, checking that
their rotary movement is in no way impeded.
Grasp the middle of the spray arm, pull it upwards to remove
it. Wash the arms under a jet of running water and replace it
carefully to its seat. After reassembly, check that the spray arms
rotate freely. Otherwise, check that they have been installed cor-
rectly.
Keep your dishwasher in good shape
• After every wash, turn off the water supply to the appliance
and leave the door slightly open so that moisture and odors
are not trapped inside.
• Remove the Plug
• Before cleaning or performing maintenance, always remove
the plug from the socket.
• No Solvents or Abrasive Cleaning
• To clean the exterior and rubber parts of the dishwasher, do
not use solvents or abrasive cleaning products. Only use a
cloth with warm soapy water.
• To remove spots or stains from the surface of the interior,
use a cloth dampened with water with a little vinegar, or a
cleaning product made specifically for dishwashers.
When not in use for a long time
It is recommend that you run a wash cycle with the dishwasher
empty and then remove the plug from the socket, turn off the
water supply and leave the door of the appliance slightly open.
This will help the door seals to last longer and prevent odours
from forming within the appliance.
Moving the Appliance
If the appliance must be moved, try to keep it in the vertical
position. If absolutely necessary, it can be positioned on its back.
Seals
One of the factors that cause odors to form in the dishwasher is
food that remains trapped in the seals. Periodic cleaning with a
damp sponge will prevent this from occurring.
Installation instructions
Disconnect electrical power and electrical equipments before
installing dishwasher. should be done by qualified profes-
sionals. Failure to do so can result in death or electrical shock.
Preparation
The installation position of dishwasher should be near the exist-
ing water inlet tap and drain outlet and power socket. One side
of the cabinet sink should be chosen to facilitate the connection
of drain hoses of the dishwasher.
Positioning the appliance
Position the appliance in the desired location. The back should
rest against the wall behind it, and the sides, along the adjacent
cabinets or wall. The dishwasher is equipped with water supply
and drain hoses that can be positioned to the right or the left to
facilitate proper installation.
Power connection
For personal safety:
• Do not use an extension cord or an adapter plug with this
appliance.
• Do not, under any circumstances, cut or remove the earth-
ing.
Connection from the power cord.
Please look at the rating label to know the rating voltage and
connect the dishwasher to the appropriate power supply. Use the
required fuse 10 amp, time delay fuse or circuit breaker recom-
mended and provide separate circuit serving only this appliance.
Electrical requirements
Ensure the voltage and frequency of the power being corre-
sponds to those on the rating plate. Only insert the plug into an
electrical socket which is earthed properly. If the electrical socket
to which the appliance must be connected is not appropriate for
the plug , replace the socket, rather than using a adaptors or the
like as they could cause overheating and burns.