- 4 -
8.
With care, fix the hinges to the doors using
screw (G)
9
. Fit hinge to mounting plate and tighten
screw “Y” (see below )
10
.
Hinge adjustment:
X
– Lateral adjustment up to 3mm
Y
– Vertical adjustment by mounting
plate only, after loosening screw
Front to back adjustment up to 4mm
Cabinet back panel
9.
For added strength and stability, the white rear
panel connectors (L) can be screwed through the
back panel as shown opposite.
Position the connectors: two to the top and
bottom and one into each side at approximately
half way.
This product is designed to conform to the latest safety regulations and we hope you will be happy with your purchase.
Whist every effort is made to ensure this product reaches you in good condition, in the unlikely event you find a problem
with any component, please
do not
attempt to assemble
– and contact your retailer. As you will appreciate, we cannot
accept liability for damage once an attempt to assemble has been made.
CLEANING: - A damp cloth should be sufficient to keep this product in good order. Please do not attempt to use abrasive
cleaning materials, as this will incur damage. Thank you for choosing our product. We hope you will be happy with your
purchase.
X
Y
