2
©
2014 Scaletron Industries Ltd., Plumsteadville, PA Scaletron, Scaletron Sets the Standard In Corrosion Resistance, Model 1020-1, 1020-2, Model 1099, Model 2305, Model 2306, Model 2307,
Model 2308, Model 2310, Model 2330, Model 2350, Model 2352, Model 2353, Model 3001, Model 3002, Model 3003, Model 3004, Model 3005, Model 3006, Model 3050-1, Model 3050-2, Model 4000SS,
Model 4010, Model 4020, Model 4021, Model 4030, Model 4040, Model 4040IBC, Model 4041, Model 4042, Model 4042WB, Model 4042-ECO, Model 4042WB-ECO, Model 5305 are trademarks of
Scaletron Industries Ltd. Total Electronic System is a service mark of Scaletron Industries Ltd.
PRINTED IN THE U.S.A. MAR 2014.
Power:
120 Volt, 50/60 Hz single phase, 0.5 amps. 240 Volt available with jumpers on board.
Dimensions:
35.00” deep maximum x 30.25” wide maximum x 11.13” high approximate.
Bladder model extends the width dim6.00”. See deployment area for bladder below.
III.
Assembly and Start-Up:
The set up procedure is as follows:
1.
Locate a solid, relatively level spot on the floor to install scale platform. Clean all debris
that may interfere with scale clearance. Use the adjustable load cell leveling foot to level
the base unit from front to back, and tighten the nut against the cell to prevent movement.
VERY IMPORTANT: If you are using the Model 4042WB-ECO™, make sure that expandable
bladder has room and clearance to expand without coming into contact with any other objects
that may cause a leak or obstruct proper expansion of the bladder!!!
2.
If conduit is used, about 2’ of horizontal, flexible conduit should be connected horizontally to
frame before using rigid conduit.
3. The scale is calibrated at the factory with certified test weights and should not need
calibrating when installing!
4.
Mount digital indicator to wall and attach conduit for load cell cable and output signals as
required.
5.
Connect load cell cable from load cell, or junction box, to TB-1 as follows:
TB1: 1: Low Level set pt. 1 (REED relay, contact closure to pin 2: common)
2: Common
3: Low Level set pt. 2 (REED relay, contact closure to pin 2: common)
*
4: 4-20 LOOP Powered (4 is common and 5 is supply)
*
5:
*
6: 4-20 SCALE Powered (5 is common and 6 is supply)
7: - Sense (optional)
8: - Excitation (BLACK)
9: + Sense (optional)
10: + Excitation (RED)
