1
© 2011. Scaletron Industries Ltd. Plumsteadville, PA Scaletron. Scaletron Sets The Standard In Corrosion Resistance. Model 1099, Model 2305, Model
2306, Model 2307, Model 2308, Model 2310, Model 2330, Model 2350, Model 2352, Model 2353, Model 3001, Model 3002, Model 3003, Model 3004,
Model 3005, Model 3006, Model 4000SS, Model 4010, Model 4020, Model 4021, Model 4030, Model 4040, Model 4041, Model 4042 and Model 4042WB,
and Pro-Gram Guide are trademarks of Scaletron Industries Ltd. Total Electronic System is a service mark of Scaletron Industries Ltd. All Rights
Reserved. .PRINTED IN U.S.A. NOV 2011.
These instructions generally describe the installation, operation, and maintenance of subject
equipment. The manufacturer reserves the right to make engineering refinements that have not been
described herein. Should any questions arise that may not be answered specifically by these
instructions, they should be directed to
Scaletron Industries Ltd.
,
Or Our Sales Agent
for a
response.
All possible precautions were taken in packaging each piece of equipment to prevent shipping
damage. Carefully inspect each item and report damages immediately. Report all damage claims to
the shipping agent involved for equipment shipped F.O.B. job site. Do not install any damaged
equipment.
All instructions given on any labels, or attached tags, should be followed. Carefully inspect all
packing material before discarding to prevent the loss of accessories, mounting hardware, spare parts,
or instructions.
TABLE OF CONTENTS
PAGE
I.
GENERAL DESCRIPTION…………………………………………………………………………….1
II.
SPECIFICATIONS………………………………………………………………………………………2
III. ASSEMBLY AND START-
UP…………………………………………………………………………2
IV.
GENERAL USE INSTRUCTIONS………………………………………………………………….2-3
V. CALIBRATI
ON PROCEEDURE………………………………………………………………………3
VI. TROUBLESHOOTIN
G……………………………………………………………………………..3 - 4
VII. BOARD DIAGRAM & 4-
20mA CONNECTION DIAGRAM…………………………………….5 - 6
I.
General Description:
The Model 2308B
™ Digital Gas Cabinet Scale is designed for weighing cylinders 9 inches in
diameter and smaller, with a maximum net weight of 199.9 lb. and a maximum tare weight of
150 lb. The low profile design of the platform allows for safe and easy loading and unloading of
cylinders. The printed circuit board contains a separate tare and span control. The weigh meter
electronics are housed in a NEMA 4X enclosure for mounting on wall or a cart, and has a
momentary switch button mounted on the front panel.
Standard Parts
1 Base assembly
1 Weigh Meter with momentary switch
1 Technical Manual
1 Sealed rechargeable NiMH battery pack
1 Wall charger for battery pack
Available Options
A. Remote mounting of standard enclosure
B. Load Cell Cable
