Preparations for start-up
Charging the battery
1.
The symbol " " on the LC display indicates
that the battery is depleted. Connect the product to a
USB port of a PC or a USB charger with the micro
USB cable.
2.
The battery symbol in the LC display flashes or the
battery charge is indicated in per cent.
3.
The battery symbol goes out when the battery is
full.
Setting the timer and the temperature display
1.
Open the lock of the ON/OFF button (see figure on
page 8).
2.
With the device switched off, press and hold the
MEMORY button until the flashing year is displayed.
Set the year with the ON/OFF button.
3.
Press the MEMORY button again to enter the
setting of the month, day, hours and minutes.
4.
Then "CL" is displayed. Press the ON/OFF button
"on" for constant display of the time or "off" to hide
the time. Up to 4 alarm times (AL1 - AL4) can be set.
When an alarm is set, the alarm time is displayed.
5.
Press the MEMORY button once more to enter the
temperature display. Toggle between °C, °F, and no
temperature display (oFF) with the ON/OFF button.
Complete all settings by pressing the MEMORY
button.
The alarm times are not activated by locking
the ON/OFF button.
- 10 -
Possible variations of the blood pressure during a
day:
How to obtain reliable measurement values
?
For reliable measurement values, please follow our
recommendations:
1. Always make the measurement at the same time
and under the same conditions.
2. Do not eat, smoke or move during the
measurement. Do not drink coffee or consume
alcohol within 30 minutes before the measurement.
3.
Remove tight clothing from your wrist and make
sure that the area for the cuff is free.
4.
Sit upright at the table and relax for about 5
minutes to ensure that the measurement is made in
a steady atmosphere.
5.
If you want to repeat the measurement, wait at
least 5 minutes.
- 7 -
