Digital blood pressure monitor SC 6360
for measurements on the upper arm
Operating instructions
Introduction
Thank you very much for your decision to buy the SC 6360
blood pressure monitor. It is most easily operated, as the
settings that were still necessary with older models have
all been taken care of by the electronic programming
(Fuzzy logic). Just press the relevant button and the
measurement can start.
But this instrument has much more uses. In order to utilize
all its options, please read these instructions carefully
before you use the instrument for the first time and keep
them in a safe place for future reference.
Special features of the SC 6360 blood pressure
monitor
♦
The SC 6360 has a special logic for recognizing the
required pumping pressure (Fuzzy logic). If the pumping
pressure set by the manufacturer is insufficient, the
manometer will recognize it and increase the pressure by
further pumping.
♦
The device has 60 memory locations. The date and time
are displayed and stored together with every blood
pressure value. To recall the memory, please press “MEM
Button” under power-off mode first. Then, the average
measurement result will be shown on the LCD first.
♦
You may set 3 different times for the alarm and
measurements.
♦
The instrument switches automatically back into its clock
function 3 min after the blood pressure has been
measured.
3
