Scag Power Equipment SWZ36A-14FS, Руководство оператора

Страница: 31 / 71

27
R
Section 7
MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS (CONT'D)
HOURS
PROCEDURE COMMENTS
BREAK-IN
(FIRST 10)
8 40 100 200 500
X
Check hardware for tightness
X
Change engine oil filter See paragraph 7.4
X
Replace engine fuel filter See paragraph 7.5
X
Grease caster wheel pivot
shafts See paragraph 7.2
X
Drain hydraulic system and
replace oil and filter See paragraph 7.3
X
Adjust electric PTO clutch See paragraph 6.6
* Perform these maintenance procedures more frequently under extreme dusty or dirty conditions
7.2 LUBRICATION
GREASE FITTING LUBRICATION CHART
LOCATION LUBRICATION INTERVAL LUBRICANT
NO. OF
PLACES
1 - Caster Wheel Pivot 100 Hours / Bi-Weekly Chassis Grease 2
2 - Caster Wheel Bearings 100 Hours / Monthly Chassis Grease 2
3 - Brake Actuator Levers 100 Hours / Bi-Weekly Chassis Grease 2
4 - Cutter Deck Spindles 40 Hours / Weekly Spindle Grease 2 / 3
5 - Pump Control Pivot 100 Hours / Monthly Chassis Grease 2
6 - Brake Lever 100 Hours / Bi-Weekly Chassis Grease 1
7 - Neutral Cam Pivot 200 Hours / Monthly Chassis Grease 2
+ Compatible Greases: Scag Premium Chassis Grease p/n 486257
Scag Premium Spindle Grease p/n 486258