Scag Power Equipment SWMU-52A Скачать руководство пользователя

Страница: 5 / 47

SIGNAL WORDS

This symbol means

Attention! Become Alert!

Your Safety is Involved!"

The symbol is used with

the following signal words to attract your attention to

safety messages found on the decals and throughout

this manual. The message that follows the symbol

contains important information about safety. To

avoid injury and possible death, carefully read the

message! Be sure to fully understand the causes of

possible injury or death.

Signal Word:

It is a distinctive word on safety decals and through-

out this manual that alerts the viewer to the existence

and relative degree of the hazard.

The signal word DANGER denotes that an ex-

tremely hazardous situation exists on or near the

machine that could result in high probability of death

or irreparable injury if proper precautions are not

taken.

The signal word WARNING denotes that a hazard

exists on or near the machine that can result in injury

or death if proper precautions are not taken.

The signal word CAUTION is a reminder of safety

practices on or near the machine that could result in

personal injury if proper precautions are not taken.

INTRODUCTION

Your mower was built to the highest standards in the

industry. However, the prolonged life and maximum

efficiency of your mower depends on you following

the operating, maintenance and adjustment instruc-

tions in this manual.

We encourage you to contact your dealer for repairs.

All Scag dealers are informed of the latest methods to

service this equipment and provide prompt and

efficient service in the field or at their service shop.

They carry a full line of Scag service parts.

A replacement Operator's Manual is available from

your Scag Servicing Dealer or by contacting Scag

Power Equipment, Service Department, at P.O. Box

152, Mayville, WI 53050. Please indicate the com-

plete model and serial number of your Scag product.

USE OF OTHER THAN ORIGINAL SCAG

REPLACEMENT PARTS WILL VOID THE

WARRANTY.

The Right and Left, Front and Rear of the

machine are referenced from the operators perspec-

tive when in the normal operating position and facing

the forward travel direction.

GENERAL SAFETY INSTRUCTIONS

READ THIS OPERATOR'S MANUAL

and

instructions furnished with attachments.

Perform only those maintenance procedures de-

scribed in this manual. If major repairs are ever

needed or assistance is desired, contact an Author-

ized Scag Dealer. To ensure optimum performance

and safety, always purchase genuine SCAG replace-

ment parts and accessories.

Your safety and the safety of others depends signifi-

cantly upon your knowledge and understanding of all

correct operating practices and procedures of this

machine.

WARNING:

CAUTION:

Содержание SWMU-52A
















































Результаты поиска

Содержание SWMU-52A

Отзывы:

Похожие инструкции для SWMU-52A

Бренды по названию

Популярные бренды

Scag Power Equipment SWMU-52A, Руководство оператора

Результаты поиска

Содержание SWMU-52A

Отзывы:

Похожие инструкции для SWMU-52A

Бренды по названию

Популярные бренды