15
R
Section 4
To disengage the deck drive, push the switch in to
3.
the disengage position.
Always operate the engine at full throttle to properly
4.
maintain cutting speed. If the engine starts to lug
down, reduce the forward speed and allow the
engine to operate at maximum RPM.
OPERATING PLATFORM
4.7
The machine can be operated with the platform in the
raised or lowered position. However, caution must be used
when operating the machine with the platform in the raised
position, especially on an incline and/or when the grass is
wet. Wet grass reduces traction and steering control.
WARNING
The operator platform is heavy and may cause
injury when lowering and raising the operator
platform. The platform may suddenly drop if not
supported when the latch lever is released.
Do not put hands or fingers in the platform
pivot area when lowering or raising the operator
platform.
Make sure the operator platform is supported
when the latch lever is released.
Make sure the latch lever secures the platform
when folding it in the raised position.
keep bystanders away when raising or lowering
the operator platform.
Operating the machine with the platform in the raised
position is recommended when:
Mowing in small or tight areas.
•
In areas with low over hanging branches or
•
obstacles.
Loading the machine for transport.
•
Driving up slopes.
•
To raise, pull upward on the platform and lock into place.
The platform must be secured in the raised position by the
latch. See Figure 4-5.
Operating the machine with the platform lowered is
recommended when:
Mowing most areas.
•
Driving or mowing across slopes.
•
Driving or mowing down slopes.
•
To lower, support the platform with your hand and push
down on the latch lever to release the lock. See Figure
4-5.
LOWERED POSITION
RAISED POSITION
OPERATOR PLATFORM
LATCH LEVER
OPERATOR PLATFORM
LATCH LEVER
Operator Platform
Figure 4-5.
