manualshive.com logo in svg

Scag Power Equipment SPZ52-22FX, Руководство оператора

Поделиться
Скачать
Scag Power Equipment SPZ52-22FX Скачать руководство пользователя страница 41

37

R

Section 7

 CAUTION

Inspect the cutter blade spacer(s) and washer 
for wear and/or cupping. Replace the worn parts. 
Worn spacer(s) and/or washer will not allow 
proper tightening of the cutter blade and can lead 
to cutter blade failure, personal injury or property 
damage.

4.  To install the new cutter blade, put the lockwasher 

and flatwasher onto the blade bolt and slide the bolt 
into the hole in the cutter blade.

5/8-11 x 1-1/2" HEX HEAD BOLT
TORQUE TO 75 FT/LBS 

LOCKWASHER

FLATWASHER

CUTTER BLADE

Figure 7-9. Blade Replacement

- NOTE -

Be sure that the blade is installed with the lift wing 
toward the top.

5.  Install the cutter blade onto the cutter spindle shaft. 

Secure the blades from rotating and torque to 75 ft/
lbs. See Figure 7-9.

7.9 TIRES

Check the tire pressures after every 8 hours of operation 
or daily.

 Caster 

Wheels 

 25 

PSI

 Drive 

Wheels 

 8 

7.10 BODY, DECK, AND UPHOLSTERY

 CAUTION

Do not wash any portion of the equipment while it 
is hot. Do not wash the engine; use compressed 
air.

1.  After each use, wash the mower and cutter deck. 

Use cold water and automotive cleaners. Do not use 
pressure cleaners.

2.  Do not spray electrical components.

3.  Use a mild soap solution or a vinyl/rubber cleaner to 

clean the seat.

4.  Repair damaged metal surfaces using Scag touch-

up paint available from your authorized Scag dealer. 
Wax the mower for maximum paint protection.

Содержание SPZ52-22FX










































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды