6
R
Section 2
3. Tighten the hardware.
4. Install the left and right side upright mounting tubes
to the grass catcher hood assembly. Secure using
(4) 3/8-16 x 2-1/4" hex head bolts and (4) 3/8-16
elastic stop nuts. See Figure 2-15.
-NOTE-
For SZL models, the mounting tubes are installed
in the outer mounting holes as shown below.
3/8-16 ELASTIC
STOP NUT
3/8-16 x 2-1/4”
MOUNTING TABS
TOWARD THE CENTER
OF THE MACHINE
3/8-16 ELASTIC
STOP NUT
3/8-16 x 2-1/4”
MOUNTING TABS
TOWARD THE CENTER
OF THE MACHINE
SFZ / SFZP / SPZ MODELS
SZL MODELS
Figure 2-15. Up Tube Installation
5. Install the adapter to the hose and secure with (1)
8-5/8" clamp included with this grass catcher. See
Figure 2-16.
8-5/8” CLAMP
HOSE
ADAPTER
Figure 2-16. Hose to Adapter Installation
6. With help from an assistant, install the grass catcher
hood assembly onto the grass catcher mounting
brackets installed on the machine in Step 4. See
Figure 2-17 for SFZ / SFZP models and Figure 2-18
for the SZL models. Secure with the (2) snap pins
included with this grass catcher.
