Scag Power Equipment Freedom Z SFZ36-18FS Скачать руководство пользователя | Manualshive

Страница: 2 / 79

background image

WARNING

FAILURE TO FOLLOW SAFE OPERATING PRACTICES MAY RESULT

IN SERIOUS INJURY OR DEATH.

• Read this manual completely as well as other manuals that came with your mower.
• DO NOT operate on steep slopes. To check a slope, attempt to back up it (with the

cutter deck down). If the machine can back up the slope without the wheels slipping,
reduce speed and use extreme caution.

• Under no circumstances should the machine be operated on slopes greater than 15

degrees. ALWAYS FOLLOW OSHA APPROVED OPERATION.

•  Stay two cut widths away from slopes, drop offs, ditches and retaining walls.
•  DO NOT mow on wet grass. Wet grass reduces traction and steering control.
•  Keep all shields in place, especially the grass discharge chute.
•  Before performing any maintenance or service, stop the machine and remove the

spark plug wire and ignition key.

•  If a mechanism becomes clogged, stop the engine before cleaning.
•  Keep hands, feet and clothing away from power-driven parts.
•  Keep others off the mow

er (only one person at a time).

REMEMBER - YOUR MOWER IS ONLY AS SAFE AS THE OPERATOR!

HAZARD CONTROL AND ACCIDENT PREVENTION ARE DEPENDENT UPON THE AWARENESS,
CONCERN, PRUDENCE, AND PROPER TRAINING OF THE PERSONNEL INVOLVED IN THE
OPERATION, TRANSPORT, MAINTENANCE, AND STORAGE OF THE EQUIPMENT.

This manual covers the operating instructions and illustrated parts list for:

SFZ36-18FS

with a serial number of

F3100001 to F3199999

SFZ48-20FS

with a serial number of

F3200001 to F3299999

SFZ48-26BS

with a serial number of

F3300001 to F3399999

SFZ52-20FS

with a serial number of

F3400001 to F3499999

SFZ52-26BS

with a serial number of

F3500001 to F3599999

SFZ61-28BS

with a serial number of

F3600001 to F3699999

Always use the entire serial number listed on the serial number tag when referring to this product.

«
1
2
3
4
...
»

Содержание Freedom Z SFZ36-18FS
















































































Отзывы:

Нет отзывов

Похожие инструкции для Freedom Z SFZ36-18FS

Бренд: ECLOZ Страницы: 56

Бренд: Yard Machines Страницы: 44

Бренд: Yardworks Страницы: 21

GTTAC51T-BS675RT16

Бренд: Gardeo Страницы: 115

Бренд: Rapid Страницы: 9

Бренд: Simplicity Страницы: 48

Бренд: MTD Страницы: 20

Бренд: Toro Страницы: 52

Бренд: Homelite Страницы: 36

Бренд: Toro Страницы: 24

Бренд: Yardworks Страницы: 35

Бренд: Sabo Страницы: 124

Бренд: Yardworks Страницы: 27

HS-7030 HITCH-N-SWEEP

Бренд: Parker Страницы: 6

Бренд: Gardeo Страницы: 128

Бренд: RHINO Страницы: 98

Бренд: MTD Страницы: 18

Бренд: Coopers of Stortford Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды