Customer Helpline
1300 889 028
10
Operating Instructions
4. ADDING DETERGENT
1. Unscrew the cap of the built-in detergent tank. (See G1)
2. Add detergent to the tank and screw the cap back on. (See G2)
4) Start the pressure washer by turning ON/OFF switch to ON, let the machine run for a
while to reach the necessary pressure,and then press the gun trigger (9). (See E)
REMINDER:
Motor does not run continuously, only when trigger is squeezed.
3. ADJUSTING THE SPRAY
The adjustable spray nozzle can adjust from fan to jet setting. The spray is adjusted from
jet spray to fan spray by turning the nozzle as shown in F.
NOTE:
the pressure of the spray on the surface you are cleaning increases as you move
the wand closer to the surface.
CAUTION:
Jet spray adjustment is very aggressive. Do not adjust while spraying. We
recommend that for most cleaning applications a 20-degree spray angle should be used
to avoid damage to the surface being sprayed.
Surface preparation
Before staring any cleaning task it is important the area for objects which could create a
hazard. Remove objects from the work area which area which could be tripped over, such
as toys or outdoor furniture. Ensure that all doors and windows are closed tight.
6
6
A
C
B
8
9
20
A1
A2
B2
B1
C2
C1
D2
D1
F
E
G2
G1
C4
C3
H2
H1
6
6
A
C
B
8
9
20
A1
A2
B2
B1
C2
C1
D2
D1
F
E
G2
G1
C4
C3
H2
H1
