5
6
13. Insert the AXLE (Part 7) into one AXLE BRACKET (Part 6), through the
WHEEL (Part 11), add 2 Washers (G) on the each side of the wheel, then into
the other AXLE BRACKET.
14. Insert Bolts (C) into the second hole on the HANDLE, and through the AXLE
BRACKET, and then secure the bolts with 2 Locking nuts and washers (F).
STEP 4:
16. Insert Bolts (C) through first hole on the TRAY BRACE (Part 9) and the hole
in the HANDLE, and then through the AXLE BRACKET, and secure on the
bottom of the HANDLE with 2 Locking nuts and washers (F).
17. Insert Bolts (E) into the holes in the TRAY and through the hole on the TRAY
BRACE and secure them with 2 Locking nuts and washers (F) on the outside
of the TRAY.
19. When assembly is completed, tighten all bolts.
STEP 2:
9. Slide the NOSE GUARD (Part 8) over the open end of the HANDLE.
10. Make sure the hole on the side of the NOSE GUARD align with the hole
on the HANDLE.
11. Insert Bolts (D) through the NOSE GUARD and then into the HANDLE.
12. Secure the HANDLE and NOSE GUARD with 2 Locking nuts and washers
(F) on the 2 bolts.
STEP 3:
Содержание 131353
Страница 1: ......
