SBS SBS-3500, Инструкция по эксплуатации

Страница: 22 / 59

Page 22
RFID Enables importing RFID tags that are allocated to a method or sample ID. The
method or sample ID allocated will automatically be used for the following
measurements.
Store
Provides the same functionality as the key on the back of the instrument
and starts and stores a measurement.
Print Enable immediate print-out of the measured value using the IrDA interface.
1.
Press <Menu> and select “Setup > Softkey”.
2. Select the preferred setting (RFID, Store, Print) and press <Save>.
8.8 Password Protection
You can protect your instrument with a password according to your demands. If the password
protection is enabled, the password needs to be entered before changing the settings, before
performing an adjustment and before selecting a measuring unit.
For performing measurements as well as entering, changing, or deleting measuring methods or sample
IDs no password is required.
You can change the password anytime or disable password protection entirely.
To set a password
1.
Press <Menu> and select “Setup > Set Password”.
2. Enter the first number of your password using the arrow keys and press <OK>.
3. Repeat this procedure to set the other numbers of the password and press <Continue>.
4. Enter the password again and press <Save>.
The password has now been saved.
5. Keep your password information safe.
To change or delete the password
1.
Press <Menu> and select “Setup”.
2. Enter your password.
3. Select “Set Password”.
4. Enter the current password and press <OK>.
5. If you want to change the password, enter the new password.
Your settings are now protected with the new password.
6. If you want to disable the password protection entirely, enter <0000> as the new password and
press <Save>.
The password protection is now disabled.