4
Thanks for choosing our products, enjoy the using.
Mounting the Ceiling Plate to the Ceiling
Step 4
Diagram 4
Use the Ceiling Plate(d) as a template to mark 4 hole locations on the ceiling. Pre-Drill these holes with a 3/8
masonry bit to at least 3"(75mm) in depth. Insert a Concrete Anchor(l) into each of these holes. Make sure the anchor is
seated completely flush with the concrete surface even if there is a layer of drywall or other material in front. Attach the Wall
Plate to the wall using 4pcs Lag Bolts(k) and 4pcs M8 Washer(j), see Diagram 4.
"(10mm)
Connecting the Tube to Connection Part
Step 5
Determine the angle you want to tilt for the Tv and Connect the bottom of Tube Set(a) to the Connection Part(c) using 2pcs
Long Bolt(m), 2pcs Butterfly Nut(o) and 4pcs M8 Washer(j), see Diagram 5.
Diagram 5
m
j
o
l
j
k
d
j