SBO Hearing SBO BTE SP, Быстрое руководство по установке

Страница: 3 / 4

SBO
Radio Model - Quick Installation Guide
Radio Model Name:
SBO BTE SP
SBO Hearing A/S
Main +45 39 17 71 00
Kongebakken 9
Fax +45 39 27 79 00
DK-2765 Smørum
Denmark
www. sbohearing .com
3
On the bottom side of the main PCB of the
SBO BTE SP
radio model the connector for the speaker unit assembly (where the wire antenna for the Bluetooth
radio is an integrated part), the programming connector, EEPROM memory and coil antenna for the 3.84 MHz radio can be seen:
The most important parts inside the Engine module are a Digital-Signal-Processor (DSP), a radio Front-End (FE) chip for the 3.84 MHz radio part and an RF
chip for the Bluetooth radio part – all mounted on a small rigid PCB again mounted on the main flex PCB. The
SBO BTE SP
radio model also includes all
voltage regulators and buffered data programming inputs on board. The DSP is the main processor controlling the functionality of both radios in the
SBO BTE
SP
radio model.
The
SBO BTE SP
radio model is intended to be installed in Oticon, Bernafon, Sonic, SBO Hearing and affiliated wireless hearing aid devices of the
SBO BTE SP
(Behind The Ear, Super Power) wearing style.
SBO BTE SP
Radio Model – Main PCB – Bottom side