SBM 12 ZRFA, Технические инструкции

Страница: 5 / 11

5
3. IGNITING THE HEATERS :
3.1 CONNECTING THE GAS HEATER
3.2 IGNITION OF HEATERS (Automatic regulation)
IMPORTANT: Preheat the building 24 hours before the animals arrive.
Open the main valve.
Set the G6A-G10A MAXI gas regulators to 10 , MINI to :
-

for all types of heater except 216FA.
-

for 216FA.
Switch on the installation power supply.
Adjust the
VisioLon Elv-T set-point to the temperature required for the
animals.
Ignition of the heaters is automatically controlled by the VisioLon Elv-T.
Valve B10F
or valve NPT
Sensor A1
(supplied with VisioLon)
Chain 2.5m
G31 (Propane) 1.5 bar
G20 (Natural gas) 1.5 bar
Sensor cable
RP3 + 1 x 0.25A fuse
ZRFA brooder
Optional plugs
(not supplied)
Clik CL10
or CLT
G6A or G10A
Main gas
valve
Gas
filter
230V AC
RCD 16A - 30mA
(Residual Current Device)
KIT MODULE ENCLOSURE 2 ZONES
VisioLon Elv-T
Ground terminal
Enclosure