Navsight Solution
– Hardware Manual
NAVSIGHTHM.1.4
5.4. Keyboard and LEDs indicators
5.4.1. LEDs status indicators
Following LEDs display various useful status information.
LED
Name
Color codes
Power status
OFF: No power supply available
RED
: Unit is Idle (not running but power is available).
BLINKING ORANGE
: No valid IMU data has been received
BLINKING GREEN
: Unit is starting up and is not yet ready
GREEN
: Unit is running correctly
Ethernet status
OFF: No network connected
RED
: The product wasn't able to get a valid auto ip (private) or static IP address
ORANGE
: The product has a valid auto ip (private) or static IP address
GREEN
: The product has successfully obtained a valid IP address from a DHCP server
GNSS status
OFF: No GNSS available
BLINKING RED:
Unknown positioning mode
RED
: Standalone mode
BLINKING ORANGE
: DGNSS with RTCM data older than 10 seconds
ORANGE
: Stable DGNSS mode with optimal RTCM age
BLINKING GREEN
: Float RTK or PPP solution
GREEN
: Fixed RTK or PPP solution (centimetric accuracy)
INS status
OFF: Kalman filter is not yet initialized
BLINKING
RED
: Vertical gyro / AHRS mode in alignment phase
RED
: Vertical gyro / AHRS in aligned mode
BLINKING ORANGE
: INS, in alignment phase. INS outputs are not all in "valid state"
ORANGE
: INS is aligned but Position/Velocity/Attitude/Heading are not all in "valid state"
BLINKING GREEN
: INS, in alignment mode. INS outputs are all in "valid state"
GREEN
: INS, is aligned and Position/Velocity/Attitude/Heading are all in "valid state"
Datalogger status OFF: Datalogger not running
RED
: Datalogger error or full
BLINKING RED
: Data logger disk is being formatted
BLINKING ORANGE
: Data logger is waiting for data but disk is almost full > 80%
ORANGE
: Data logger is logging but almost full >80%
BLINKING GREEN
: Data logger is waiting for data
GREEN
: Data logger is running
34/73
