28
ADJUSTING HANDSET RECEIVER VOLUME
There are 4 receiver volume levels in the handset(s).
The current level is displayed while the line is in use. It
can be adjusted by pressing [▼ ] / [▲ ] during talk mode or
intercom mode. (Also applies to headset operation)
TO MUTE A CALL
W hile on a call, press [MUTE] to turn OFF the
microphone. The display will show “MUTE” and the other
party will not hear you. Press [MUTE] again to resume
conversation and the “MUTE ” on the display will
disappear.
PAGING and INTERCOM
Locate m isplaced handset(s)
To locate the handset(s) while not on the base unit, press [Page] on the base unit. All
the handset(s) in range will display “PAGING FROM BASE”, and emit an alert signal that
is different from others, e.g. incoming call.
To stop a paging call, press [Page] again or press [EXIT]. If no handset answers, the
paging call will automatically stop after 30 seconds.
Note: The handset(s) will ring even if the ringer is set to OFF.
Intercom between handsets
A handset can intercom with another handset registered
to the same base unit. For details, please refer to page
43.
1234567
0:01:30 VOL-2
HOL D
3W AY
SERVICE DIR. DIAL V.M.
MUTE
1234567
0:01:30 VOL-2
HOL D
3W AY
SERVICE DIR. DIAL V.M.
INTERCOM
HS (2)
HS (3)
O.K. EXIT
B A S I C O P E R AT I O N
Содержание SBC-383
Страница 56: ...55 CY383 Cy bi ot r on i c sLt d...