SBC FSR Enduro, Руководство пользователя

Страница: 14 / 20

12
CARBON FRAME INSTRUCTIONS
The Specialized Enduro Carbon frames utilize advanced composite materials that
require particular care during assembly, storage and riding. This installation and care
guide contains instructions and warnings, plus torque specifications. Assembling a
complete bicycle is a complicated task requiring training and experience, only a trained
and experienced bicycle mechanic should install components to this frame. Reference
should also be made to Barnett’s or some other comprehensive bicycle manual.
WARNING! Failure to follow these instructions may result in a catastrophic failure of
the frame and/or its components while riding, which may result in serious personal
injury or death.
WARNING! Bicycle assembly is an art which requires training and experience. Do not
attempt installation of any component if you do not have experience and training as a
bicycle mechanic.
To ensure the best assembly possible and to prevent any damage to the components
or frame, follow all torque specifications. Please refer to the specific owner’s manuals
for mating component’s correct torque specifications. If the mating component’s
recommended torque exceeds the frame’s recommended torque, use the lower torque
spec. Due to torque considerations, not all components will be compatible.
WARNING! Failure to follow the torque specifications in this installation guide will
void your warranty, but most importantly may result in damage to the frame which
may not be visible. If the frame is damaged, this can result in loss of structural
integrity.
Bicycle components such as a handlebar, handlebar stem, seatpost, saddle, brakes,
must be mutually compatible with each other, as well as the frame and the intended
use. Any doubt regarding compatibility should be discussed with your local authorized
Specialized retailer.
WARNING! When placing the frame and/or bicycle in a repair stand, clamp the stand
to the seatpost and not the frame. Clamping the frame can cause damage to the frame
that may or may not be visible, which may impair the structural integrity of the frame.
SEATPOST
• SEAT TUBE I.D.
• SEAT POST O.D.
GR
EASE
• To preserve smooth QR lever action,
lubricate contact surfaces regularly
36.9mm
Refer to your seatpost owner’s
manual prior to installation.
Specialized Mountain frames have
a 30.9mm seatpost diameter and
require that the seatpost have a
tolerance of 30.78mm to 30.95mm.
Do not grease inside surface of carbon
seat tube!
The Enduro Carbon frames use
a bolt-style seatpost clamping
mechanism. Since the components
of this assembly are in direct contact
with carbon fiber, pay special
attention to ensure proper tightness
for the seatpost when correctly
tightened to specifications.
Specialized recommends the application of carbon assembly compound between the
seat tube and post to increase friction. Recommended compounds can be found at www.
tacx.com. See your authorized Specialized retailer if you have any questions.