PRODUCT MANUAL
Password Voice Recorder : SB-VR8204
Page 5
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
QUICK START - RECORD
Need to start recording immediately, without reading the entire manual first, then read this page:
Turn the Power Switch to ON.
In fact, leave the Power Switch in the ON all the time.
You should
only turn it OFF when you are not going to use your voice recorder for an extended period of
time. Turning it off will reset all your customized settings and you will need to reset them again. If
you didnt do any custom settings then you can turn it on or off as needed.
Screen will turn on and ask you to enter password. If you dont want to deal with password right
now, simply press the MODE button to continue. This will take you to the main screen.
Press the (REC) button to begin recording. A little red light at the top of the recorder will stay on
while recording.
To stop recording, press the STOP button
IMPORTANT: Please note, the screen tends to turn off after a few seconds (to conserve batery). If
that happens while you are in the middle of canging something, simply press any button to turn
screen back on, then press the button you want to submit your instructions. If you press a button
for a specific command, it will simply wake recorder the first press, so you will need to press the
button again to submit the instructions. Keeo this in mind when using this recorder.
With the power switch on all the time, you will use the REC button to turn your recorder on and
off. If it is OFF, simply press and HOLD the REC button for about 5 seconds or until screen turns
on. release. Do likewise to turn off.
SYSTEM POWER
ON & OFF
MODE
NOTE:
Default password is: 0000
STOP button