16
Correctly Positioning
Good ventilating
For the purpose of safety, reliance, low power consumption and durability to you fridge, a
space should be need around the refrigerator. please keep 100mm of space between the
back of the appliance and the wall.
Power supply
The refrigerator is only suitable to single –phase alternating current of 220-240V, 50HZ.
Notes
Its plug must match the socket with ground wire, the socket must be connected according to
E earth line, N zero line, L fire line.
Power Cord
The cord should be neither lengthened nor folded into coil during operation. Moreover, it is
forbidden that the cord is kept close onto the
compressor at the back of the fridge, the surface temperature of which is quite high when
operating. Touching with it may melt the insulation and cause electrical leakage.
Protection from Moisture
Avoiding placing the fridge in a place where heavy moisture is present so as to minimize
possibility of rusty for its metal parts. Still more, the fridge is forbidden to be directly
sprayed by water, otherwise, it would cause poor insulation and current leakage may occur.
Fixing Stably
Floor on which fridge will be placed must be flat and solid. It should not be laid on any soft
material such as foam plastic, ect if the fridge is not on the same level, adjust the screws
suitable. The fridge should not be placed near anything which may echo.
Protection from Heat
The fridge should be far away from any heat source or direct sunshine.
Keep Away from Danger
It is inadvisable that the fridge is placed near any volatillizables or combustibles such as gas,
petrol, alcohol, lacquer and banana oil,etc. The above-mentioned objects can not be stored
in the refrigerator.
Moving
When fixing or moved, the fridge can not beset horizontally or declined to less than
113°F(45°)or upside-down.
