
PRODUCT MANUAL
One-Touch Voice Recorder Pen : SB-P640
Page 3
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
BEFORE YOU START
You should fully charge your pen before first
use.
Unscrew the top of the pen from the bottom.
The pen separates at the gold band.
Inside, be sure the power control is set to
OFF - away from the Red Dot.
Carefully insert the USB cable as shown, with
the silver side UP. Please do not force the
cable into position.
Connect the other end of the cable to your
PC or Mac. Your computer may install
standard drivers the first time you connect -
this is normal.
Let charge for several hours. Then, eject your
pen as you would any other external drive
and disconnect the cable.
You are now ready to use your pen!
NOTE: Your pen is meant to be charged via
your PC USB port.
Alternative adapters must not exceed 5 Volts
and 500 milliamps. / .5 Amp.