
- Page 8 -
bending, so be careful when handling, inserting or removing SIM
card.
Switch your phone off.
Remove the phone cover and the battery.
Press and slide SIM card upwards to take it out.
Install memory card
Your phone support Micro SD memory card.
Switch off your phone.
Remove the back cover and battery.
Press and slide the metal cover down. Now you can open it.
Put a Micro SD card in the base. The beveled corner points down and
the gold contacts face to phone.
Close the metal cover and slide it upwards to lock firmly.
Remove memory card
Switch off your phone. Remove the back cover and battery.
Press and slide the metal cover down. Open the metal cover and take
the memory card out of the place.
Charging the battery
Insert the standard USB terminal in the travel charger. Insert another
terminal in your phone slot. Connect the charger to a standard AC wall
socket (220V).
Your phone will warn you that a charger is connected. The bars in
battery icon will grow again and again until the battery is full charged.
If the battery is full, charge will stop even the charger is attached to
your phone.
If the battery completely flat, it may take a few minutes before the
charging indicator appears on the screen or any calls can be made.
You can use the phone while the charger is connected. But that will
take more time to charge.
Don’t connect your phone to a charger if the battery is not installed.