D
Male Connector
After the joiner fixture has been hung remove the wire ways
•
at each fixture joint.
Using pliers or an adjustable wrench, uninstall the acorn nuts
•
and slide the wire ways off the fixture.
This will provide the access needed to secure fixtures
•
together and hide wiring.
Join the male end of the connector to the female end of the connector
•
between fixtures.
Connection points for wire harnesses are located between the gear tray
•
and the joiner bracket of the fixtures.
Ensure that wire colors are matching when joining connectors.
•
TXF-ISS-Continuous Run
Installation Instructions
Step 5 -
Suspend Joiner Fixture(s) (Cont'd)
C. Remove Wire Ways
D. Connect Wire Harness
Fo
rm
M
C
M
- T
XF
-IS
S-C
R,
V
1,
05
/2
0
Acorn Nuts
Wire Ways
DETAIL D
SCALE 1 : 8
Joiner Bracket
Connection Point
Inside
Female Connector
